煤基费托合成油中微量总铁的测定

铁系催化剂的残留污染一直是煤间接液化技术生产费托合成油工艺生产和产品质量控制的重点关注问题之一。准确分析合成油中微量残留铁的含量已成为工艺开发过程中至关重要的手段。该文对不同检测方法进行了对比,以燃烧灰化样品等离子体发射光谱检测铁含量的方法对不同沸点的合成油样品进行了验证,并通过实验数据优化了检测方法中的关键步骤。经验证费托合成油样品前处理最优条件为称样量5 g,马弗炉于500℃灰化1 h。该法对铁含量测定的回收率大于95%,相对标准偏差(RSD)不大于5.7%,检出限及定量下限分别为0.15 mg/kg和0.50 mg/kg。     

纳米金-还原氧化石墨烯修饰葡萄糖氧化酶传感器的制备及其电流法检测饮料中的葡萄糖

利用纳米金(Au NPs)与还原氧化石墨烯(rGO)复合纳米材料制备了葡萄糖氧化酶生物传感器并用于饮料中葡萄糖含量的检测。将壳聚糖作为还原剂及稳定剂,通过一步法合成了Au NPs-rGO复合材料,并通过物理吸附固定葡萄糖氧化酶(GOx)来制作GOx生物传感器。该传感器在磷酸盐缓冲溶液(0.1 mol/L,p H6.0)中,-0.45 V(vs.Ag/Ag Cl)电位下电流法检测葡萄糖含量,线性检测范围为0.01~0.88 mmol/L,灵敏度为22.54μA·mmol-1·L·cm-2,检出限为1.01μmol/L,且表观米氏常数为0.497 mmol/L。该传感器用于多种饮料中葡萄糖含量的直接检测,结果满意。     

Nanostructured Platinum‐iridium Alloy Microelectrode for Ammonia Determination

Nanostructured platinum‐iridium alloy microelectrode with high surface area was successfully prepared by applying successive potential cycles to a conventional PtIr microdisc in ionic liquid electrolyte containing ZnCl₂ at elevated temperature. Scanning‐electron microscope studies show that a very thin nanostructured film was created on the electrode upon 20 potential cycles between −2.0 and 0.75 V versus a Ag pseudo‐reference electrode. The film nanostructures are characteristic of regular hill‐like nano‐spacings separated by valley‐like nano‐cracks, and a roughness factor of approximately 40. The nanostructured electrode is highly active towards electrochemical oxidation of ammonia, and generates a linear relation between voltammetric peak currents (or chronoamperometric currents), and logarithm of ammonia concentration in a range of approximately 1 ppm to 10000 ppm. It has been proposed that the Temkin adsorption of ammonia from the bulk solution onto the electrode surfaces was involved in its electrochemical oxidation and could be responsible for the linear current‐logarithmic concentration relation.     

不同等级煤与油共炼的转化率差异及残渣分析

选取安徽褐煤、辽宁褐煤和贵州烟煤三种煤为原料,以油溶性环烷酸钼为催化剂,分别与马瑞常渣(MRAR)、克炼常渣(KAR)以及催化裂化油浆(FCCS)在高压釜内模拟悬浮床加氢共炼反应。结果表明,不同的油体系下,两种褐煤都能达到83%以上的转化率,而对于贵州烟煤,转化率最高的FCCS体系与最低的KAR体系分别为67.75%和50.31%,相差很大。采用FT-IR和SEM分析反应后固体残渣,计算了固体残渣中脂肪族和芳香族中各个基团的相对含量,并对比了不同体系反应后固体残渣的微观形貌。结果表明,KAR体系的固体残渣脂肪链较长,支链化程度高,取代度较低。转化率较高的褐煤反应后固体残渣结构松散,分散度高;转化率较低的烟煤固体残渣随着转化率降低,残渣颗粒逐渐变大,表面更加光滑,板结程度加深。     

基于还原石墨烯/纳米银复合材料的电化学传感器测定双酚A

石墨烯特有的褶皱层状结构以及银纳米粒子良好的催化性能,使其在电化学方面具有良好的应用潜能.本研究以柠檬酸钠为还原剂,通过水热反应原位制备出还原石墨烯/纳米银复合材料(rGO/AgNPs),用于修饰玻碳电极,研究了双酚A的电化学行为.循环伏安法(CV)和方波伏安法(SWV)的实验结果表明,双酚A可以在rGO/AgNPs修饰电极表面发生快速的氧化还原反应,基于此实现了对双酚A的高灵敏检测.在最优条件下,双酚A的氧化峰电流与其浓度在0.1~40.0μmol/L范围内呈良好的线性关系(r2=0.996),检出限为50.7 nmol/L(S/N=3).将其用于实际环境和塑料样品中双酚A的检测,回收率为91.7%~102.9%.     

Simultaneous voltammetric determination of carbendazim and carbaryl in medicinal plant infusions with a boron-doped diamond electrode

This study is aimed to develop an electroanalytical methodology using a boron-doped diamond electrode to determine simultaneously and selectively carbendazim (CBZ) and carbaryl (CAR). In previous studies using cyclic voltammetry oxidation, peaks were observed at 1.03 V (CBZ) and 1.44 V (CAR), with characteristics of an irreversible process controlled by diffusion of species, with a supporting electrolyte of BR buffer (0.1 mol L^?1) and pH adjusted to 6.0. The differences between the potentials for both pesticides, about 400 mV, indicate the possibility of selective determination of CBZ and CAR. The square-wave voltammetric parameters were optimised. The best separation conditions were pH 6.0, square-wave frequency of 100 s^?1, pulse amplitude of 50 mV and scan increment of 2.0 mV. These parameters were used to obtain the calibration curves of CBZ and CAR. An analytical curve was constructed in the range concentration of CBZ of 1.3 mg L^?1 to 15.3 mg L^?1 and CAR of 1.0 mg L^?1 to 11.4 mg L^?1, respectively. The limits of detection (LOD) and limits of quantification (LOQ) for CBZ were 0.40 mg L^?1 and 1.30 mg L^?1, respectively. For CAR, the LOD and LOQ were 0.30 mg L^?1 and 1.00 mg L^?1, respectively. Sensitivity values were 0.78 and 2.60 µA/mg L^?1 for CBZ and CAR, respectively. The electroanalytical method was applied in Mikania glomerata infusions. The recovery values were 106.2% and 116.5% for CBZ and CAR, respectively. The results show that the developed method is suitable for application in medicinal plant samples.     

盾构渣土基碳复合陶粒的制备及除磷性能

以固体废弃物地铁盾构渣土、稻草秸秆和氧化镁为主要原料,通过烧结法制备了一种盾构渣土基碳复合陶粒。考察了陶粒吸附磷的主要影响因素及平衡吸附量,并采用模型对实验数据进行拟合分析。结果表明,当盾构渣土、稻草秸秆粉末和氧化镁质量比为7∶2∶1,在最佳烧结条件700℃烧结可得到除磷性能最佳的陶粒。当吸附pH=6.3时,陶粒具有较高的磷吸附性能。吸附在12 h内基本能达到吸附平衡,该过程适合准二级动力学方程。盾构渣土基碳复合陶粒对磷酸盐的吸附符合Temkin等温模型,随温度升高吸附量逐渐增大,40℃下最大吸附量为12.76 mg/g。热力学参数ΔH=5.64 k J/mol0,ΔS=8.00 J/(K·mol)0,ΔG=3.16 k J/mol0,呈吸热、非自发的热力学特征,陶粒吸附磷后可通过2.0 mol/L的氢氧化钠溶液重新解吸回收。     

The Trifluoromethyl Anion: Evidence for [K(crypt‐222)]+

[K(crypt‐222)]⁺ ( 1 ) and [K(crypt‐222)]⁺ ( 3 ) are isostructural, displaying nearly identical unit cell parameters. The two structures are similar to the extent that the previously reported [K(crypt‐222)]⁺ model can be refined against the new data for [K(crypt‐222)]⁺ , with extra electron density being observed from the fourth fluorine atom of the . In agreement with experimental observations, theoretical calculations suggest that deprotonated [K(crypt‐222)]⁺ is highly unstable even at as low as 195 K. The previously considered 1:1 CHF ₃ clathrate of deprotonated [K(crypt‐222)]⁺ (crystallographically indistinguishable from 1 ) is ruled out on the basis of all available data.     

Elemental Analysis of Phytotherapeutic Products by Inductively Coupled Plasma–Tandem Mass Spectrometry

A procedure for the determination of As, Cd, Cr, Ni, Pb, and V in phytotherapy medicines by inductively coupled plasma–tandem mass spectrometry is reported. The use of tandem mass spectrometry with oxygen into an octopole reaction system at various gas flow rates and the combination of on-mass and mass-shift modes was evaluated. Cadmium, Cr, Ni, and Pb were determined as free atomic ions while As and V were determined as the oxides AsO⁺ and VO⁺ in the same run. Samples were prepared by microwave-assisted digestion with dilute nitric acid and hydrogen peroxide. Two plant-certified reference materials (apple leaves and tomato leaves) were used to check the accuracy. For tandem mass spectrometry with 0.5?mL min^?1 O₂, recoveries in the 85–113% were typically obtained and no statistical differences were observed at the 95% confidence level (t-test) in comparison with the certified values. Using these conditions, the limits of detection for the method were 0.01, 0.0002, 0.008, 0.008, 0.003, and 0.002?µg g^?1 for As, Cd, Cr, Ni, Pb, and V, respectively. The procedure was used for the analysis of four phytotherapic drugs and the determined concentrations were up to 0.168?µg g^?1 As, 0.03?µg g^?1 Cd, 0.82?µg g^?1 Cr, 1.18?µg g^?1 Ni, 0.52?µg g^?1 Pb, and 2.4?µg g^?1 V with average precision values of 8% as the relative standard deviation. The found concentrations were compared with limits proposed in official guidelines and, in most cases, the values were below the maximum limits allowed.     

Activation of Molecular Hydrogen by Bis(η5,η1‐pentafulvene)‐titanium Complexes – Efficient Formation of Titanium(III)hydrides

The synthesis and crystal structures of two dinuclear titanocene hydride complexes are reported. Both complexes, namely bis(η⁵‐(di‐para‐tolylmethyl)cyclopentadienyl)titanium hydride dimer, [(η⁵‐C₂₀H₁₉)₂Ti(μ‐H)]₂ ( 2a ), and bis(η⁵‐2‐adamantylcyclopentadienyl)‐titanium hydride dimer, [(η⁵‐C₁₅H₁₉)₂Ti(μ‐H)]₂ ( 2b ), are formed via activation of molecular hydrogen by the corresponding bis(η⁵,η¹‐pentafulvene)titanium complexes 1a and 1b at ambient temperatures and pressures in high yields. The hydride complexes 2a and 2b exhibit planar [Ti₂H₂] cores and, as a result of the heterolytic cleavage of molecular hydrogen, substituted Cp Ligands were formed during the reaction.